Heras HGD230, User Manual

Page: 104 / 146

EN – Translation of the original user manual - 2.1 | 2019 104
202 EEPROM error A fault occurred while accessing the
EEPROM.
203 StackReg.error The motor controller detected a stack
memory error (serious exception/error)
204 Stack_error:low The motor controller detected a stack
memory error (serious exception/error)
205 Stack_error:high The motor controller detected a stack
memory error (serious exception/error)
206 WdgError:low The motor controller detected a
watchdog error (serious
exception/error)
207 WdgError:high The motor controller detected a
watchdog error (serious
exception/error)
208 Watchdog error The motor controller detected a
watchdog error (serious
exception/error)
209 WDG reset The motor controller was restarted by
the watchdog
210 MotRunTimeError The motor movement was stopped
because the maximum motor run time
for this gate movement was reached
211 Main-cntError Main loop counter overflow of the
motor controller (serious
exception/error)
212 Non-def.status The variable of the automatic status
feedback unit reached an Invalid value
(serious exception/error)
213 Limitsw.error The limit switch was not cleared within
the maximum time allowed (4 sec.)
214 < MAINTENANCE >
necessary One of the specified maintenance
events (gate cycle, motor run time,
service interval) occurred
215 Limits Undef. The end positions of the gate are not
defined for the control software (eg
both contacts of limit switches open)
217 EEPR.error.Txt The display text searched was not
found in the memory