Heras HGD230, User Manual

Page: 89 / 146

EN – Translation of the original user manual - 2.1 | 2019 89
If the program does not recognize a valid code within 20 seconds after activating
the teach-in process, the display returns to the menu.
7.20.4 Deleting transmitters from the memory
You can delete specific individual hand transmitters from the HMD230 memory.
The menu option "Delete transmitter" puts the motor drive in a mode where the
next correctly received hand transmitter is deleted from the memory again.
•
Menu: "RF remote control", activate "Delete transmitter".
•
The first line of the display now reads: "Delete transmitter".
•
Now press a key on the hand transmitter to be deleted.
•
When the transmission code has been recognized, the menu is displayed
again.
•
Check the number of transmitters stored by means of the menu option
"Active transmitters".
7.20.5 Deleting memory location
If a specific radio remote control or a special button of a transmitter from the
memory of the controller is to be deleted without the corresponding remote
control being available, this can be done via the menu item "Delete Pos.". Then a
list of the programmed hand-held transmitter positions or the special key
functions is displayed.
The position of the memory location to be deleted is selected by turning. If you
press the dial again, you are looking for "Delete?". After having pressed the rotary
switch again, this input is removed from the memory and this is confirmed with
the "Ready" display.
7.20.6 Deleting all transmitters from the memory
All transmitters stored in the memory of the HMD230 can be deleted using the
menu option "Delete all".
•
Menu: "RF remote control", activate "Delete all".
•
Check the number of transmitters stored by means of the menu option
"Active
•
transmitters".