Henny Penny LVG-202, Technical Manual, Page: 73 / 174

Maintenance
65
3 3))
Using a 1” wrench, loosen the rear pump fitting.
4 4))
Locate the appropriate conduit on right side of the unit and disconnect the
conduit from the fryer.
5 5))
Using a 1/2 in. wrench, remove 4 bolts securing motor to motor bracket and pull
pump and motor assembly from fryer.
6 6))
Using a 1/2 in. wrench, remove the 2 bolts securing pump to the motor and pull
the pump from the motor.
7 7))
Install a new seal kit (part no. 17476) onto shaft of motor.
8 8))
Align the shaft of motor with the rotor on the inside of the pump and push pump
onto shaft of motor.
9 9))
Secure the pump onto the motor with the 2 bolts.