Henny Penny LVG-202, Technical Manual, Page: 35 / 174

Level
3
Programming
27
Menu Step Description
SP-5 Quick
Configuration Press the down arrow and “SP-5 QUICK CONFIG” shows in display. Use
the left and right arrows to change the menu selection in the controls to:
CHKN+FSH; FF/HBR; CHKN/EMPTY.
SP-6 Polish
Duration Press the down arrow and “SP-6 POLISH” shows in left display. Use
product buttons to change polish time, from 5 minutes to maximum of 10
minutes.
SP-7 Drain
Valve Press the down arrow and “SP-7 DRAIN VALVE” scrolls in left display.
Use the left and right arrows to change right display to show “NORMAL”
or “MANUAL”. “NORMAL” means the drain valves are controlled elec-
tronically and “MANUAL” means the drain valves must be opened by
hand.
SP-8 Edit Unit
Serial Number Press the down arrow and “SP-8 S/N ✓EDIT” shows in left display. Press
the right “✓” button to enter the unit’s serial number in the controls using
the product buttons. “STD” and “CUST” show in the right display. Press
the “✓” button under the “STD” and the first 2 letters of the serial number
is the standard equipment code, press the “X” button and a custom
equipment code can be entered.
NOTE: This serial number should match the serial number on the data
plate, located on the door.
SP-9 Decal
Layout Press the down arrow and “SP-9 DECAL LAYOUT?” scrolls in the left
display. The words in the right displays should match the arrow type
above the temp and info buttons. For example, if the control decal shows
down-up, the right display should show “DOWN-UP”. If the display shows
“UP-DOWN”, use the left and right arrows to change the displays to
“DOWN-UP”.
SP-11 Melt
Cycle Select Press the down arrow and “SP-11 MELT CYCLE SELECT” scrolls in the
left display. Unless solid oil is being used in the vats, the right display
should show “1.LIQUID”. If solid oil is used, the unit must be equipped to
handle solid oil. Use the left and right arrows to change the right display
to “2.SOLID”.
SP-12 Change
Pad Reminder
Time Press the down arrow and “SP-12 ‘CHANGE PAD’ REMINDER” shows
on the display. Use the product buttons to change the time between
changing the filter pad reminders. For example, if “25 HRS is pro-
grammed in the right display, every 25 hours, the display shows
“CHANGE PAD” as a reminder to the operator that the filter pad needs
changed.
SP-13 Pan Out
Of Fryer = Pad
Changed Press the down button and “SP-13 PAN OUT = CHANGED PAD” scrolls
in the left display. Use the product buttons to program the amount of time
the drain pan is pulled out from under the fryer before the controls reset
the change pad reminder. This is the amount of time it should take to
change filter pad. Range is 15 to 255 seconds. For example, if “120
SEC” is programmed in the right display, when the drain pan is out form
under the fryer for at least 120 seconds, the control restarts counting for
the change pad reminder.