Henny Penny LVG-202, Technical Manual, Page: 39 / 174

Level
3
Programming
31
Menu Step Description
• “AIF X” - A problem with the communication between the PCBs.
Press the down arrow and “FILR IN” “USE BY 1(ex)” shows in the dis-
plays. These displays show which controls are using the filtering
system.
• “USE BY 0” - Not in use.
• “USE BY 7” - Used by AIF.
• “USE BY 1 to 5” - Used by control PCB.
Press the down arrow and “CPU POSN” “1 of 3(ex)” shows in the dis-
plays. These displays show which controls are plugged into which
port on the AIF board. For example, the left control should be plugged
into port 1, and on a 3 control fryer, shows “1 of 3” on the display. If
the right control is unplugged, then the left control would show “1 of 2”
instead of “1 of 3”.
Press the down arrow and “INP E_P_” & JL_R_DT_” shows in
displays.
A
AIIF F B Bo oa arrd d IIn np pu uttss
• “E” - Stop button.
• “E*” - E-Stop pressed.
• “P” - Drain Pan
• “M*” - Drain pan missing.
• “JL” - JIB
• “J*” - JIB oil level is low.
• “R” - RTI
• “R*” - RTI system detected.
• “DT” - RTI Discard Tank
• “DT*” - Tank is full.
Press the down button and “OUT F_J_” “N_DI_oJF_” shows in the
display.
A
AIIF F B Bo oa arrd d O Ou uttp pu uttss
• “F” - Filter Pump
• “F*” - Filter pump is on.
• “J” - JIB Pump
• “J*” - JIB pump is on.
• “N” - New Oil Pump
• “N*” - RTI new oil pump is on.
• “DI” - Discard Valve