Henny Penny LVG-202, Technical Manual, Page: 67 / 174

Maintenance
59
4 4))
Use an adjustable wrench to remove the flex line from the back of the gas valve
that is leading to the gas manifold.
5 5))
Mark the locations of the wires on the gas valve and then remove the wires.
6 6))
Use a 3/8 inch wrench or socket to remove the three nuts located on the bottom
side of the shroud (behind the door).
7 7))
Lift the gas valve from the bottom of the shroud. Use an adjustable wrench to
remove the flex line from the front of the gas valve leading to the burner.
8 8))
Remove the brass fitting or fittings from either side of the gas valve and save for
reuse.
9 9))
Remove the fittings from the front and back of the gas valve.