Henny Penny LVG-202, Technical Manual, Page: 34 / 174

Level
3
Programming
26
Program Code Description
S SP P--5 58 8 Idle Mode
S SP P--5 59 9 Idle button enabled
S SP P--6 60 0 Auto Idle minutes
S SP P--6 61 1 Idle set point
S SP P--6 62 2 Lonworks enabled/disabled.
S SP P--6 67 7 Deep Clean day limit. 0=off, 1-255 days.
S SP P--6 68 8 Deep Clean prompt time.
S SP P--6 69 9 Deep Clean triggers cooking lock out. Yes/No.
S SP P--7 70 0 Filter Lock Out enabled/disabled.
NOTE: Not all Special Program Mode functions are discussed in this section. To
ensure proper operation of fryer, please consult Henny Penny Corp. before changing
any of these settings. For information on these functions, contact Service Department
at 1-800-417-8405, or 1-937-456-8405.
T Ta ab blle e 6 6--2 2 S Sp pe ecciia all P Prro og grra am mm miin ng g P Prro occe ed du urre ess
Menu Step Description
SP-1 Zone -
USA/Non-USA Press “✓” and “SP-1 ZONE” shows in the display. Use the left and right
arrows to set the default setpoints to USA specifications or non-USA
specifications.
SP-2 System
Initialization Press the down arrow and “SP-2 DO SYSTEM INIT” scrolls in left dis-
play. To reset the controls to factory default settings, press and hold “✓”
and controls count down “IN 3”, “IN 2”, “IN 1”. Once display shows “-INIT-
” “*DONE*”, the controls are reset to factory defaults.
SP-3 2nd
Language Press the down button and “SP-3 LANGUAGE” scrolls in left display.
Use the left and right arrows to set to: ENGLISH; FRANCAIS; CAN
FREN; ESPANOL; PORTUG; DEUTSHE; SVENSKA; РУССКИИ or
-NONE-.
NOTE: By setting a second language in the controls, 2 languages can
now be easily chosen by pressing the info button twice during normal op-
eration. Once language shows in the right display. Pressing “✓” selects
the language in the display.
SP-4 2nd
Volume Press the down arrow; “SP-4” “2ND VOLUME” flashes on the left display.
Press the left and right arrows to turn option on and to set volume from 1-
10.
NOTE: By setting a second volume in the controls, 2 volumes can now
be easily chosen by pressing the info button three times during normal
operation. Once volume settings shows in the right display. To select the
volume, press “✓” button under the desired volume.