Henny Penny LVG-202, Technical Manual, Page: 32 / 174

Level
3
Programming
24
T Ta ab blle e 6 6--1 1 S Sp pe ecciia all P Prro og grra am m M Mo od de ess
Program Code Description
S SP P--1 1 ZONE - USA or NON-USA (default setpoints)
S SP P--2 2 System Initialization
S SP P--3 3 2nd Language: English, French, Candian-French, German, Spanish,
Portuguese, Swedish, Russian, & NONE
S SP P--4 4 2nd Audio Volume
S SP P--5 5 Quick Configuration - CHKN+FSH; FF/HBR; CHKN; EMPTY
S SP P--6 6 Polish Duration - X:XX M:SS
S SP P--7 7 Drain Valve - NORMAL or MANUAL
S SP P--8 8 Edit S/N (Serial Number)
S SP P--9 9 Decal Layout? - UP/DOWN or DOWN/UP
S SP P--1 10 0 Recovery Test Limit - XXX SEC
S SP P--1 11 1 Melt Cycle Select - 1.LIQUID or 2.SOLID
S SP P--1 12 2 ‘Change Pad’ Reminder Time - XX HRS
S SP P--1 13 3 Pan Out = Changed Pad Time - XXX SEC
S SP P--1 14 4 Auto-Fill Enabled? - YES or NO
S SP P--1 15 5 Auto-Fill Cycle Time? - XXX SEC
S SP P--1 16 6 Auto-Fill Check JIB - XXX CNT
S SP P--1 17 7 Oil Full If Delta Above... - XX°F or C
S SP P--1 18 8 Oil Full If Delta Below... - XX°F or C
S SP P--1 19 9 Heat Allowed During Fill? - HEAT OK or NO HEAT
S SP P--2 20 0 Always Ask “IS POT FILLED?” - YES or NO
S SP P--2 21 1 Oil Drain Time - XXX SEC
S SP P--2 22 2 Oil Wash Time - XXX SEC
S SP P--2 23 3 Oil Rinse Time - XXX SEC
S SP P--2 24 4 Oil Type Fill Time - XXX SEC
S SP P--2 25 5 Repeat Fill Time - XXX SEC
S SP P--2 26 6 RTD Air Cooling - X.XX°/SC
S SP P--2 27 7 RTD Cold Oil Surround - X.XX°/SC
S SP P--2 28 8 RTD Hot Oil Surround - X.XX°/SC