Henny Penny LVG-202, Technical Manual, Page: 25 / 174

Level
1
Programming
17
4 4))
Press “✓” button and use the left and right arrows to scroll through “ENABLE”
and “DISABLE” and then press “✓” button again to select one.
5 5))
If “ENABLE” is chosen, then the up and down arrows can be use to scroll
through the following list of blocking periods:
M-F 1 XX:XX A XX
M-F 2 XX:XX A XX
M-F 3 XX:XX A XX
M-F 4 XX:XX A XX
SAT 1 XX:XX A XX
SAT 2 XX:XX A XX
SAT 3 XX:XX A XX
SAT 4 XX:XX A XX
SUN 1 XX:XX A XX
SUN 2 XX:XX A XX
SUN 3 XX:XX A XX
SUN 4 XX:XX A XX
6 6))
In 12-hour clock mode, there are three items on each line: the start time “XX:
XX”, the “A” or “P” (am/pm) setting, and the “XX” duration. Use the left and right
arrows to set these items, which flashes when the item is selected.
7 7))
To set a new start time setting, use the product buttons to enter the new value.
8 8))
Press the right arrow to step over to the AM/PM setting. The “A” or “P” can be
toggled by pressing the ‘0’ product button.
9 9))
Press the right arrow again to step over to the duration value (in minutes). Enter
a new value using the product buttons.
NOTE: In 24-hour clock mode, there are only two items on each line: the time
(XX:XX) and the duration (XX). Again, the left and right arrow buttons step you
between these items.
1 10 0))
Press the right-side “X” button to exit out of AIF Clock programming mode.
4 4..3 3 D De ee ep p C Clle ea an n M Mo od de e
This procedure allows a thorough cleaning of the vat by removing caramelized oil from
vat. See Operator’s Manual for complete set of instructions.
4 4..4 4 F Frryye err S Se ett--U Up p
This mode has the same settings as seen upon initial start-up of the fryer.
1 1))
Press and hold the temp and info buttons until “LEVEL - 1” shows in the display,
followed by “ENTER CODE”.
2 2))
Enter code 1, 2, 3, 4 (first 4 product buttons). “PRODUCT” and “SELECTN”
show in the displays.