Henny Penny LVG-202, Technical Manual, Page: 17 / 174

Info,
Filter
&
T
emp
Button
Stats
9
C Ch ha ap ptte err 2 2 IIn nffo o,, F Fiilltte err & & T Te em mp p
B Bu utttto on n S Stta attss
NOTE: If no buttons are pressed within 5 seconds in any of stat modes, the controls
revert back to normal operation.
2 2..1 1 IIn nffo o B Bu utttto on n S Stta attss
T Ta ab blle e 2 2--1 1 IIn nffo o B Bu utttto on n S Stta attss
Menu Step Description
Recovery Infor-
mation For Each
Vat Information Press and release the info button and “REC” shows in the left display
and the recovery time that oil temperature went from 250°F (121°C) to
300°F (149°C) shows in the right display. For example, “REC 5:30”
means it took 5 minutes and 30 seconds for the oil temperature to recov-
er to 300°F (149°C) from 250°F (121°C). REC time should be less than
2:25 (2 minutes and 25 seconds).
Selected
Languages Press and release the info button twice and display shows primary lan-
guage in left display, and secondary language in the right display, if pro-
grammed. Press ✓ button under either language to switch unit operation
to that language.
2 2..2 2 F Fiilltte err B Bu utttto on n S Stta attss
T Ta ab blle e 2 2--2 2 F Fiilltte err B Bu utttto on n S Stta attss
Menu Step Description
Cook Cycles Re-
maining Before
Filtering Press either filter button 1 time, the left display shows the number of cook
cycles before the next auto filter. For example, “REMAIN” “3” “6” means
after 3 more cook cycles on the left vat, the controls ask operator if they
are ready to filter or not. On the right vat, 6 more cook cycles remain be-
fore asking the operator if they are ready to filter or not.
Time & Date Press either filter button 2 times, “FILTERED” shows in the displays,
along with time-of-day and date of the last filter.
Filter Pad Usage Press either filter button 3 times, the number of hours the current filter
pad has been used shows in the display.
2 2..3 3 T Te em mp p B Bu utttto on n S Stta attss
T Ta ab blle e 2 2--3 3 T Te em mp p B Bu utttto on n S Stta attss
Menu Step Description
Actual Oil
Temperature Press the temp button 1 time, the actual oil temperature shows in the dis-
play for each vat.
Set-Point
Temperature Press the info button 2 times, “SP” shows in the display, along with the
set-point (preset) temperature of each vat.