Henny Penny LVG-202, Technical Manual, Page: 64 / 174

Maintenance
56
1 13 3))
Move to the front of the fryer and locate port 10 (1 1) on the selector valve body
(2 2). This will be the port located in the JIB area.
1 14 4))
Using an adjustable wrench, remove the flex line from port 10.
1 15 5))
Remove the fitting and set aside. This will allow the inside valve to be visible.
To avoid product damage, ensure the AIF
board is completely disconnected from
power before plugging in motor encoder
assembly.
1 16 6))
Manually turn selector valve body to home position by aligning the notch (3 3) with
the alignment mark (4 4) as shown.