Henny Penny LVG-202, Technical Manual, Page: 61 / 174

Maintenance
53
4 4))
Using an adjustable wrench, remove the flex line from the elbow.
5 5))
Loosen the hose clamp with a flat blade screwdriver and disconnect the hose.
6 6))
Use a 3/8 socket or wrench and remove the four nuts and washers from the
pump’s feet.
7 7))
Pull the pump off of the studs.
8 8))
Remove the wirenuts.
9 9))
Wire the new pump into the existing wires.
1 10 0))
Place the pump onto the studs. Be sure to have the shield box in place on the
studs before placing the pump onto the studs.
1 11 1))
Tighten the pump nuts and washers onto the feet of the pump.
1 12 2))
Reconnect fittings.
1 13 3))
Replace blower.