Henny Penny LVE-202, Technical Manual

Page: 11 / 115

T
roubleshooting
3
Problem Cause Correction
Cold zone (bot-
tom of vat) full of
crumbs. Filter oil.
Improper rinsing
after cleaning the
vat. Rinse the vat thoroughly to remove any cleaning agent in
the vat.
Oil will not
drain from
vat. Drain valve
clogged with
crumbs. Open valve, use straight white brush to force crumbs
through drain valve.
Faulty actuator. Replace actuator per 7.14 Drain Valves , page 62 .
Drain trough
clogged. Remove and clean out drain trough.
Oil leaking
through
drain valve. Obstruction in
drain. Remove obstruction.
Faulty drain
valve. Replace drain valve.
Locations with
RTI, the 3-way
valve is stuck
open. The RTI system can be disconnected until RTI repairs the
valve.
Vat is
under-
filled. JIB is low or
empty. Fill the JIB.
JIB oil line is
clogged or
collapsed. Check JIB line.
Filter pan needs
cleaned. Clean filter pan and change paper or pad.
Quick disconnect
not engaged
properly. Disconnect and reconnect quick disconnect fitting.
Bubbles in
oil during
entire filter-
ing
process. Filter pan not
completely
engaged. Make sure filter pan return line is pushed completely into
the receiver on the fryer.
Filter pan
clogged. Clean pan and change pad.
Damaged O-ring
on filter line re-
ceiver on fryer. Change O-ring.
Filter motor
runs but Filter line connec-
tions loose. Tighten all filter line connections.