Henny Penny LVE-202, Technical Manual

Page: 15 / 115

T
roubleshooting
7
Display Cause Correction
5 5.. Check for voltage at the motor connection AIF side. Is
there a voltage of 24VDC? if yes, replace motor. If no,
check harness and AIF board.
“E-82B” Home switch
failed, Position
switch working.
“E-82C” Both switches
failed. Valve will
not operate.
“E-82D” Position switch
failed. Valve will
not operate.
“E-83-A” Pressure too
high. Check filter system in Vat #1.
“E-83-B” Pressure too
high. Check filter system in Vat #2.
“E-83-C” Pressure too high Check filter system in Vat #3.
“E-83-D” Pressure too
high. Check filter system in Vat #4
“E-83-E” Pressure too
high. Check filter system in Vat #5.
“E-83-J” Bulk JIB FILL
switch on when
pressure too
high. Check JIB fill valves.
“E-83-R” Bulk Dispose
switch on when
pressure too
high. Check Bulk Dispose quick-disconnect behind fryer.
“E-93A” 24VDC Tripped. Have motors for drain valves and selector valve checked.