Henny Penny LVE-202, Technical Manual

Page: 27 / 115

Level
1
Programming
15
3 3))
Press the down arrow once and “AIF CLOCK” show in the displays.
4 4))
Press ✓ button and use the left and right arrows to scroll through “ENABLE” and
“DISABLE” and then press ✓ button again to select one.
5 5))
If “ENABLE” is chosen, then the up and down arrows can be use to scroll
through the following list of blocking periods:
• M-F 1 - XX:XX A XX
• M-F 2 - XX:XX A XX
• M-F 3 - XX:XX A XX
• M-F 4 - XX:XX A XX
• SAT 1 - XX:XX A XX
• SAT 2 - XX:XX A XX
• SAT 3 - XX:XX A XX
• SAT 4 - XX:XX A XX
• SUN 1 - XX:XX A XX
• SUN 2 - XX:XX A XX
• SUN 3 - XX:XX A XX
• SUN 4 - XX:XX A XX
6 6))
In 12-hour clock mode, there are three items on each line: the start time “XX:
XX”, the A or P (am/pm) setting, and the “XX” duration. Use the left and right
arrows to set these items, which flashes when the item is selected.
7 7))
To set a new start time setting, use the product buttons to enter the new value.
8 8))
Press the right arrow to step over to the AM/PM setting. The A or P can be
toggled by pressing the ‘0’ product button.
9 9))
Press the right arrow again to step over to the duration value (in minutes). Enter
a new value using the product buttons.
NOTE: In 24-hour clock mode, there are only two items on each line: the time
(XX:XX) and the duration (XX). Again, the left and right arrow buttons step you
between these items.
1 10 0))
Press the right-side “X” button to exit out of AIF Clock programming mode.
3 3..3 3 D De ee ep p C Clle ea an n M Mo od de e
This procedure allows a thorough cleaning of the vat by removing caramelized oil from
vat. See Operator’s Manual for complete set of instructions.
3 3..4 4 F Frryye err S Se ett--U Up p
This mode has the same settings as seen upon initial start-up of the fryer.
1 1))
Press and hold the temp and info buttons until “LEVEL - 1” shows in the display,
followed by “ENTER CODE”.
2 2))
Enter code 1, 2, 3, 4 (first 4 product buttons). “PRODUCT” and “SELECTN”
show in the displays.