Henny Penny LVE-202, Technical Manual

Page: 36 / 115

Level
3
Programming
24
NOTE: Not all Special Program Mode functions are discussed in this section. To
ensure proper operation of fryer, please consult Henny Penny Corp. before changing
any of these settings. For information on these functions, contact Service Department
at 1-800-417-8405, or 1-937-456-8405.
5 5..2 2..1 1 S SP P--1 1 Z Zo on ne e -- U US SA A//N No on n--U US SA A
1 1))
Press ✓ and “SP-1 ZONE” shows in the display. Use the left and right arrows to
set the default set-points to USA specifications or non-USA specifications.
5 5..2 2..2 2 S SP P--2 2 S Syysstte em m IIn niittiia alliizza attiio on n
1 1))
Press the down arrow and “SP-2 DO SYSTEM INIT” scrolls in left display. To
reset the controls to factory default settings, press and hold ✓ and controls
count down “IN 3”, “IN 2”, “IN 1”. Once display shows “-INIT-” “*DONE*”, the
controls are reset to factory defaults.
5 5..2 2..3 3 S SP P--3 3 2 2n nd d L La an ng gu ua ag ge e
1 1))
Press the down button and “SP-3 LANGUAGE” scrolls in left display. Use the
left and right arrows to set to: ENGLISH; FRANCAIS; CAN FREN; ESPANOL;
PORTUG; DEUTSHE; SVENSKA; РУССКИИ or -NONE-.
NOTE: By setting a second language in the controls, 2 languages can now be
easily chosen by pressing the info button twice during normal operation. Once
language shows in the right display. Pressing ✓ selects the language in the
display.
5 5..2 2..4 4 S SP P--4 4 2 2n nd d V Vo ollu um me e
1 1))
Press the down arrow; “SP-4” “2ND VOLUME” flashes on the left display. Press
the left and right arrows to select the desired 2nd volume.
NOTE: By setting a second volume in the controls, 2 volumes can now be easily
chosen by pressing the info button three times during normal operation. Once
volume settings shows in the right display. To select the volume, press ✓ button
under the desired volume.
5 5..2 2..5 5 S SP P--5 5 Q Qu uiicckk C Co on nffiig gu urra attiio on n
1 1))
Press the down arrow and “SP-5 QUICK CONFIG” shows in display. Use the left
and right arrows to change the menu selection in the controls to: CHKN+FSH;
FF/HBR; CHKN, or EMPTY.
5 5..2 2..6 6 S SP P--6 6 P Po olliissh h D Du urra attiio on n
1 1))
Press the down arrow and “SP-6 POLISH” shows in left display. Use product
buttons to change polish time, from 5 minutes to maximum of 10 minutes.
5 5..2 2..7 7 S SP P--7 7 D Drra aiin n V Va allvve e
1 1))
Press the down arrow and “SP-7 DRAIN VALVE” scrolls in left display. Use the
left and right arrows to change right display to show “NORMAL” or “MANUAL”.
“NORMAL” means the drain valves are controlled electronically and “MANUAL”
means the drain valves must be opened by hand.
Program Code
Description
S
SPP--68
S
SPP--69
S
SPP--70
Deep Cleam prompt time
Deep Clean triggers cooking lock out. Yes/No
Filter Lock Out enabled/disabled