Assembly
Control panel
Control panel can be removed from console to be xed to a wall or fume hood.
Connection cable is 1 meter long.
Warning:
Risk of poisoning!
If operating with control panel inside of fume hood, there is a risk of
harm if fume hood is opened during process.
Remove control panel and place it outside the fume hood.
Avertissement :
Risque d’intoxication !
En cas d exploitation avec le panneau de contrôle à l intérieur de la
hotte, il existe un risque physique si la hotte est ouverte pendant le
processus.
Retirer le panneau de contrôle et le placer hors de la hotte.
Open cable carrier
Grab control panel on the top left side
and tip it to the front.
Avoid pressure to the LCD display.
The cable winding is surrounded by a
shell.
Pull shell of cable winding open.
Wrap cable to the desired length on or
o .
Position control panel
If necessary turn shell 180°.
Press shell and control panel together
until they lock audibly.
Place control panel on a clean and
stable surface or attach it to a wall.
Insert control panel into console
Turn shell into initial position with the
wide side downwards.
Wrap cable up to the yellow colored
cable mark.
Press shell and control panel together.
If necessary plug in connecting plug
with white colored tag upwards into
console.
Yellow
cable mark
Place control panel with an angle of approx. 30° forward into the console.
Press control panel into console until it locks audibly.
DOMINIQUE DUTSCHER SAS
