Assembly
Heating bath
Attach heating bath
A movable base plate with an
enhanced guide rail is located on the
right side of the base unit.
Place heating bath with gap on the
guide rail.
Move heating bath carefully to the left
and right to lock it.
Base plate
Heating bath
Guide rail
Recess
Move heating bath
It may be necessary to increase the distance between heating bath and drive when
bigger evaporating asks or spacers between evaporating ask and vapor tube are used.
Base unit is placed on a stable surface.
Allow su cient space to move heating bath.
On the right side the heating bath slides out approximately 20 cm to allow for
adjustment.
Hold heating bath on both handles and slide it to the right until you have reached the
desired position.
Vapor tube
Assembly parts
Vapor tube
Flask clamp Easy-Clip
Coupling vapor tube
Clamping sleeve
The ask clamp Easy-Clip is
pre-assembled in NS 29. For smaller asks
the Easy-Clip NS 24 is enclosed.
Clamping sleeve
Flask clamp Easy-Clip
Vapor tube
Coupling vapor tube
The device is delivered with
pre-assembled coupling for the vapor tube
and the condenser.
Hold the locking knob beneath “lock”
for a quarter turn.
Unscrew coupling of the vapor tube
along with the vapor tube on the right
side of the drive.
Unscrew coupling of the condenser on
the left side of the drive.
Coupling
condenser
Vapor tube
coupling
Flask clamp
Easy-Clip
Lock
vapor tube
Motor drive
DOMINIQUE DUTSCHER SAS
