Assembly
Condenser
Warning / Avertissement:
Risk of glass breakage! / Risque de bris de verre !
If a ask is damaged, glass can break causing serious harm
./
Si un acon est endommagé, cela peut entra ner un bris de verre
supplémentaire et causer des blessures graves.
Work with undamaged glass only and check all glassware regularly for
any damage./
Travailler uniquement avec du verre sans défaut et véri er
régulièrement que toutes les pièces en verre sont exemptes de
dommages.
Heidolphs coated glassware sets aim to minimi e the risk of injury due
to glass breakage. However they are only suitable for temperatures up
to 80° C.
PTFE seal
Slide PTFE seal with the labeling
“Motor Side” facing drive onto the
vapor tube.
The PTFE seal is tightened as far as it
will go.
PTFE seal
Condenser:
Glassware set G1 and G3
Push coupling of glassware over
condenser ange.
Push tension ring over condenser
ange.
Screw condenser to the drive
hand-tight.
Coupling
Tension ring
The condenser is mounted to the drive.
DOMINIQUE DUTSCHER SAS
