manualshive.com logo in svg

HEIDENHAIN TNC 426 CB, Technical Manual

Share
Download
HEIDENHAIN TNC 426 CB Technical Manual Download Page 749

December 2001

Tool Changer

6 – 419

Cutting data table

The cutting data for specific tools are available from the tool manufacturer.

Cutting data tables have the file name extension .CDT.

Each line in the cutting data table contains the data for a specific combination 
of workpiece and tool material. For milling cutters you can enter up to four 
cutting speeds with the corresponding feed rates per teeth. In the tables of 
the manufacturers these data are specified for different infeeds and for climb 
and up-cut milling. For drills you enter a cutting speed with the corresponding 
feed rate per revolution.

A standard cutting data table is saved in the root directory of the TNC (TNC:\). 
You can add as many cutting data tables as desired.

If you change the standard cutting data table, you must copy the changed table 
into another path. Otherwise your changes will be overwritten with 
HEIDENHAIN standard data during the next software update:

7

7

7

7

In the system file TNC.SYS, use the code word PCDT= to enter the path in 
which your cutting data tables are saved.

Material tables

The workpiece materials used are defined in the table WMAT.TAB, the tool 
materials in the table TMAT.TAB.

Standard tables are in the root directory of the TNC (TNC:\).

You can arbitrarily expand and change all tables.

If you change the tables, you must copy them into another path. Otherwise 
your changes will be overwritten with HEIDENHAIN standard data during the 
next software update:

7

7

7

7

In the system file TNC.SYS, use the code words TMAT= and WMAT=  to 
enter the path and file names of your tables.

In the material data tables:

7

7

7

7

In the Name column, enter the short description for the material (e.g. HSS).

7

7

7

7

Enter additional information on the material in DOC column.

The tool material is defined by choice of the tool type in the tool table (See 
"Tool Table, Pocket Table” on page 6 – 400). You can edit the associated 
material table:

7

7

7

7

Go into the tool table and press the SELECT WORKPIECE MATERIAL soft 
key.

Summary of Contents for TNC 426 CB
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands