manualshive.com logo in svg

HEIDENHAIN TNC 426 CB, Technical Manual

Share
Download
HEIDENHAIN TNC 426 CB Technical Manual Download Page 628

6 – 298

HEIDENHAIN Technical Manual TNC 426, TNC 430

REMAIN=OUTPUT
All M functions that are not defined in MGROUPS.SYS are transferred during 
the block scan to the PLC. If you do not enter this instruction such M functions 
are ignored.

If the PLC shifts the datum or switches the traverse range, the error message 

PLC function not permitted

 appears.

ORDER=PRIO
The M functions are transferred in the sequence in which they are entered in 
the MGROUPS.SYS file. If you do not enter this instruction, the M functions 
are transferred after a block scan in the sequence in which they were 
programmed. 
HEIDENHAIN recommends that you avoid using this instruction.

TOOLGROUP, TDEFGROUP, SPINDLEGROUP, FN19GROUP
In conjunction with ORDER=PRIO, the output sequence of the S/T/Q strobes 
after a block scan is specified in the MGROUPS.SYS file. HEIDENHAIN 
recommends that you avoid using these instructions.

NCMACRO=TC, M
With an M function or during a TOOL CALL, you can also call an NC program 
instead of a T strobe ((See “Tool Changer” on page 6 – 400) and (See "Calling 
an NC macro with an M function” on page 6 – 287)).
The instruction NCMACRO= prevents NC macros for tool change (TC) or NC 
macros for M functions (M) from running during the block scan. Rather they 
are started at the end of the block scan.

Instructions in 
MSPLIT.SYS

M functions that are effective in several groups are divided in the MSPLIT.SYS 
file into function components.

Example: M13=M3, M8

Note

In the following functions you must use REMAIN=OUTPUT:

n

Datum shift with M4132

n

PLC positioning except with TOOL CALL

n

Traverse range switchover with M4135, if MP7490=1

n

Switchover spindle 1/spindle 2 with Module 9175

Summary of Contents for TNC 426 CB
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands