manualshive.com logo in svg

HEIDENHAIN TNC 426 CB, Technical Manual

Share
Download
HEIDENHAIN TNC 426 CB Technical Manual Download Page 49

December 2001

Software

2 – 39

7

7

7

7

Complete or erase the machine parameters. Information about the machine 
parameters can be found on the READ_MP.A file on the first provided setup 
disk, or on the TNC in the directory PLC:\JH\.

7

7

7

7

Exit the machine parameter editor: Press the END key. The message 

LANGUAGE LOAD ERROR

 appears.

7

7

7

7

On the TNC, switch to the PROGRAMMING AND EDITING mode of 
operation and press the MOD key.

7

7

7

7

Enter the code number 95148 and confirm with ENT.

7

7

7

7

In the machine-parameter-editing mode of operation, press the MOD key. 

7

7

7

7

Convert updated data to binary format: Press the soft key UPDATE DATA 
and CONVERT ASC -> BIN. The name of a log file may also be entered.

7

7

7

7

Read-in files which you had saved to a PC.

7

7

7

7

End of the NC software switch.

7

7

7

7

With the COPY SAMPLE FILES soft key, the cutting data tables, the tables 
for tilted-axis geometry, and the table of M-function macros can be copied 
into the corresponding directory.

Activating and 
deleting already 
existing NC 
software

For controls with flash EPROMs, each new NC software is saved to its own 
directory in the SYS partition. 

To activate already existing NC software:

7

7

7

7

While in the 

Programming and Editing

 operating mode, press the MOD key.

7

7

7

7

Enter the code number 95148.

7

7

7

7

Press the MOD key.

7

7

7

7

Press the UPDATE DATA soft key.

7

7

7

7

Press the DEL/SEL SETUP soft key.

7

7

7

7

Use the arrow keys to select the desired NC software.

7

7

7

7

Press the SELECT soft key.

Note

For controls with EPROMs, only the contents of the setup disks are copied 
to the appropriate directories. The NC software automatically chooses the 
correct setup. 
You can also delete setups that are no longer needed with the procedure 
detailed below:

Summary of Contents for TNC 426 CB
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands