manualshive.com logo in svg

HEIDENHAIN TNC 426 CB, Technical Manual

Share
Download
HEIDENHAIN TNC 426 CB Technical Manual Download Page 46

2 – 36

HEIDENHAIN Technical Manual TNC 426, TNC 430

7

7

7

7

On the PC, enter the command SETUP or SETUP32 to copy the NC dialogs, 
HEIDENHAIN cycles etc. from the provided setup disks. After setup the 
control carries out a RESET.

• DOS and Windows in the DOS window: Use the SETUP command, 

followed by the number of the PC’s serial port (e.g., SETUP 2 for the 
COM2 port).

• Windows 95, 98, NT: Use the SETUP32 command, followed by the 

number of the PC’s serial port (e.g., SETUP32 2 for the COM2 port) or the 
TNC’s IP address (e.g., SETUP32 160.1.180.21).

7

7

7

7

On the TNC, switch to the PROGRAMMING AND EDITING mode of 
operation and press the MOD key.

7

7

7

7

Enter the code number 95148 and confirm with ENT.

7

7

7

7

In the machine-parameter-editing mode of operation, press the MOD key. 

7

7

7

7

Convert updated data to binary format: Press the soft key UPDATE DATA 
and CONVERT ASC -> BIN. The name of a log file may also be entered.

7

7

7

7

Read-in files which you had saved to a PC.

7

7

7

7

End of the NC software switch.

7

7

7

7

With the COPY SAMPLE FILES soft key, the cutting data tables, the tables 
for tilted-axis geometry, and the table of M-function macros can be copied 
into the corresponding directory.

Note

As of NC software 280 476-17, when the control starts, it checks whether 
there is enough space on the hard disk for system files. If not, the error 
message 

Too many setup files

 appears. In this event, delete any 

unnecessary setup files from the hard disk. (See “Activating and deleting 
already existing NC software” on page 2 – 39.)

Summary of Contents for TNC 426 CB
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands