![HEIDENHAIN TNC 426 CB Technical Manual Download Page 342](http://html1.mh-extra.com/html/heidenhain/tnc-426-cb/tnc-426-cb_technical-manual_2118721342.webp)
6 – 12
HEIDENHAIN Technical Manual TNC 426, TNC 430
Monitoring for
encoders with
EnDat interface
Position encoders:
In the event of a disturbance, the error message
EnDat defective <error codes> <axis>
will appear.
Meaning of the error codes up to NC software 280 476-12:
The error codes may also appear combined, in which case they add
themselves together.
A disturbance in communication between the EnDat position encoder and the
control (e.g. defective cable) results in the error message
EnDat defective 11111 <axis>.
Meaning of the error codes as of NC software 280 476-13:
The error code is shown in hexadecimal notation. The error codes may also
appear combined, in which case they add themselves together.
There are two possible types of errors:
n
The encoder reports an error.
n
Access to the encoder via the EnDat interface is faulty.
Codes of errors reported by the encoder:
Error code
(to 280 476-12)
Meaning
00001
Light source defective
00010
Signal amplitude too small
00100
Incorrect position value
Error code
Meaning
0x00000001
Light source defective
0x00000002
Signal amplitude too small
0x00000004
Incorrect position value
0x00000008
Overvoltage
0x00000010
Undervoltage
0x00000020
Overcurrent
0x00000040
Replace battery
0x00000080
Reserved
0x00000100
Reserved
0x00000200
Reserved
0x00000400
Reserved
0x00000800
Reserved
0x00001000
Reserved
0x00002000
Reserved
0x00004000
Reserved
0x00008000
Reserved
Summary of Contents for TNC 426 CB
