manualshive.com logo in svg

HEIDENHAIN TNC 426 CB, Technical Manual

Share
Download
HEIDENHAIN TNC 426 CB Technical Manual Download Page 634

6 – 304

HEIDENHAIN Technical Manual TNC 426, TNC 430

Executing a pallet 
table

The pallet table is selected and started with PGM MGT like a normal part 
program in the PROGRAM RUN, SINGLE BLOCK and PROGRAM RUN, FULL 
SEQUENCE operating modes.

Pallet entries (PAL) and fixture entries (FIX) result in a call for an NC macro. 
Program entries (PGM) are run like a PGM CALL.

7

7

7

7

With MP7683 bit 6, specify if the NC program and the pallet table should 
appear simultaneously in the split screen, or if the active NC program or 
active pallet table should be shown individually. 

7

7

7

7

With MP7683 bits 0 to 2, specify the operating sequence following an NC 
start.

7

7

7

7

With MP7683 bit 3, specify the operating sequence upon reaching the end 
of the pallet table.

DATUM

Workpiece-
oriented/tool-
oriented

Optional field:
Name of the datum table

Datum tables without paths are searched for in the directory 
with the pallet tables.

X, Y, Z, U, V, W, 
A, B, C

Workpiece-
oriented/tool-
oriented

Optional fields:
Definition of the datum.

For pallet entries, the values are referenced to the machine 
datum (MP960.x).
For NC programs the values are referenced to the pallet 
datum. Only the fields X, Y and Z are used in the standard 
format.

SP-X, SP-Y, 
SP-Z

Tool-oriented

Optional fields:
Safe positions; with FN18: SYSREAD, these positions can be 
read in NC macros.

CTID

Tool-oriented

If — due to a tool change — an NC program must be stopped 
during tool-oriented machining, the TNC enters a code. This 
code enables the TNC to resume the machining process at the 
position where it has been stopped.

LOCATION

Workpiece-
oriented/tool-
oriented

Optional field (not used in standard format):
Location of pallet.

If the LOCATION field is used, an NC program can be run only 
if this field contains the entry MA (= pallet for the machine).

LOCK

Workpiece-
oriented/tool-
oriented

Optional field:
If an entry is made in this column, the line of the entry will not 
be run.

If more than one program or pallet is to be run, the next 
permitted line is used. Unlocked lines in a locked pallet are also 
skipped.

Any names

Workpiece-
oriented/tool-
oriented

Freely definable

Name

Type of 
machining

Meaning

Summary of Contents for TNC 426 CB
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands