manualshive.com logo in svg

HEIDENHAIN TNC 426 CB, Technical Manual

Share
Download
HEIDENHAIN TNC 426 CB Technical Manual Download Page 55

December 2001

Software Releases

2 – 45

2.6.2 NC Software 280 472-xx and 280 473-xx

NC software 
280 472-01 (export 
version 280 473-01)

Release: 04/97

Improvements:

n

New function “Fast contour milling”: Cycle 32 or G62 and MP1096

n

Automatic calculation of cutting data

n

TCPM (Tool Center Point Management): With M128 you can superimpose 
manual axial machine movements during program run, whereby the offsets 
of the tilting axes are automatically compensated.

n

Additional information with the HELP key

n

Input menu for fixed input values is selected with the GOTO key.

n

New pallet management

n

Freely definable tables

n

NC blocks can be transferred in spline format.

n

More memory on the hard disk (1.5 GB)

n

The MOD function PGM MGT enables the user to choose between 
standard and extended file management.

n

In the status display the positions of all nine axes are shown. The spindle 
position overwrites the ninth axis.

n

The progress of the copying process is shown in a pop-up window.

n

The number of Q parameters was increased from 299 to 399.

n

Q parameters are also permitted in FK blocks

n

M110 is also effective in the contour pocket cycle

n

Cycle 204: Back boring

n

With MP7682 bit 2 you can define whether rotary axes should always be 
positioned by the shortest path.

n

It is now possible to enter a chamfering feed rate in an NC block for 
chamfering (CHF).

n

Cycle 19 “Working plane” has been extended with parameters for feed rate 
and safety clearance. (This applies only if the cycle positions tilted axes, 
which is defined in MP7500.)

n

M114 can also be used with non-controlled axes or PLC axes.

n

Hungarian conversational language added

n

All soft keys appear in the defined conversational language.

n

Language-dependent soft keys for OEM cycles

n

The soft keys for FK programming do not appear until you have pressed the 
FK key.

n

Soft key F for feed rate in the manual operating modes

n

New soft key: JOG INCREMENT OFF/ON

n

New soft key: HIDE TOOLS OFF/ON: In the tool table, only the tools in the 
tool magazine are displayed

n

New soft keys for copying fields in the tool table

n

PLC soft keys can be appended to NC soft-key rows.

n

Ethernet: It is possible to enter the name of a network printer.

n

The probe results of the manual probing function can be transferred 
immediately to the datum tables.

n

MP6170, MP6171: multiple measurement with measuring tolerance

n

Separate set of calibration data for TS and TT for every traverse range

Summary of Contents for TNC 426 CB
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands