HBM U10M, Mounting Instructions, Page: 30 / 128

U10M, U10S
30
A1385-6.2 en/de/fr HBM
Calibration
In the standard version, the transducer is designed for dynamic application up to a
vibration bandwidth of
"
100% F
nom
. For quasistatic applications, the transducer can be
used up to 200% F
nom
. The option is available to calibrate accordingly to 200% F
nom
.
Transducer
identification
TEDS integration (integrated electronic data sheet) in accordance with IEEE1451.4
Mechanical
design
The sensitivity is determined at the factory with the bolted‐on adapter. The bolted‐on
adapter ensures the best‐possible screw‐fastening conditions and allows the
transmission of axial force through a central internal thread. If the adapter is not used, a
sensitivity deviation of
t
1% must be taken into account.
Plug protection
Mechanical protection through the installation of an additional square profile around the
connector.
Dimensions in mm approx.: WxHxB: 30x30x20
Electrical
connection
Bridge A
The standard version is the male device connector with bayonet locking
(PT02E10-6P‐compatible). The option is also available to install a screw‐fitting male
device connector (PC02E10-6P‐compatible). A third variant where the force
transducers are fitted with a fixed cable is also available. In this version, all U10 achieve
degree of protection IP68 with a nominal (rated) force equal to or greater than 12.5 kN.
Electrical
connection
Bridge B
The standard version is the male device connector with bayonet locking
(PT02E10-6P‐compatible). The option is also available to install a screw‐fitting male
device connector (PC02E10-6P‐compatible). Both these connection variants are often
used for differentiation in the double‐bridge version. A third variant where the force
transducers are fitted with a fixed cable is also available. In this version, all U10 achieve
degree of protection IP68 with a nominal (rated) force equal to or greater than 12.5 kN.
Force
application
Mounted force application. Standard is without force application, if requested, we can
mount a force application bolt. Dimensions, see Chapter 10.