62
8.3 Wireless Settings
Wireless Setting
Wireless Connection
Enables or disables the camera’s wireless function. By default, the
function is disabled.
Mode
Infrastructure
:
This operation mode requires the presence of a
Wireless LAN (WLAN) Access Point or Router. All communication is
done via the Access Point or Router. Infrastructure mode is the
recommended mode of wireless operation.
Ad-Hoc
: Select this mode if you want to connect to another wireless
station in the Wireless LAN network without going through an Access
Point or Router. This is for peer-to-peer connection. Ad-hoc mode is
not
recommended.
SSID
The SSID (up to 32 printable ASCII characters) is the unique identifier
name for a WLAN. The ID prevents the unintentional merging of two
co-located WLANs.
You may specify an SSID for the camera and then only devices with
the same SSID can connect to the camera. If you want to add an
available nearby network to the profile list, pull down the menu. All the
nearby networks will be listed and you can add one of them to the
profile list.
Summary of Contents for HomeRemote HRNC1
