43
7.8 Viewer Utility Setting
Click the Setting button
. The camera’s setting window will then appear.
Note:
When you want to change settings such as the IP Address, Video Port, etc. in the “Setting” option, you must first
disconnect the camera by clicking the
Stop
button.
7.8.1 Setting
Setting
Name
It is not required that you fill in a camera name in order to connect to
the camera. It is only for users to identify the camera.
IP Address
IP address of the network camera.
Video Port
The number of the service port used by the video camera.
Model
Select “MJPEG Camera”. (The HRNC1 model camera only supports
Motion JPEG).
Motion Based Recording
Check this box to enable motion-triggered recording. Whenever the
camera detects motion, it will trigger a
30-second
video recording. The
user is not able to change the duration of this recording. The period is
always 30 seconds.
Username
The user name for logging into the network camera. By default, the
Administrator user name is “Admin”.
Password
The password for logging into the network camera. By default, the
password is “1234”.
Discover
Click “Discover” and the camera’s auto-discover window will appear. The
window will show all the discovered cameras on the LAN environment for
you to select.
Summary of Contents for HomeRemote HRNC1
