48
User Manual Version 3.1
ADJUST TOF
The “Top of form” (TOF) sensor or paper sensor detects the edge of every fed paper and
controls the timing of the print heads. To ensure a correct positioning of the printed image
an adjustment value is set in this menu.
To make an adjustment press Quick
+
(Test Print). The HJ830 will now print an
adjustment page with the one print cartridge, closest to the feeder. Measure the distance
between the paper edge and the printed bars. See Figure 22 below. Enter the measured
distance in the printer menu and press the Ok button.
Figure 22: ADJUST TOF test print
Pos: 60.25 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Menü_Drucker_Warning_Factroy_setting @ 1\mod_1259054235982_912.doc @ 7641 @
Factory setting
This is a default setting, entered at the initiation of the machine in the
factory. The user should change this setting only in case of a printer
malfunction and after consulting a technician.
Pos: 60.26 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü2/Ü2_1500_BOOT_DEFAULTS @ 0\mod_1254483976902_912.doc @ 4057 @
