100
User Manual Version 3.1
Protocol
code
Display message
Cause
003
PAPER TOO SMALL OR WRONG
PAPER WIDTH!
CODE: 03
Expected paper size too small
Elimination
•
Measure actual paper size
•
Compare paper size in
transport direction with size
set in printer
•
Compare paper size in PC
software with size set in
printer
•
Check if a wrong paper size is
locked
•
When using material with non-
rectangular edges or with
press cut sections turn off the
PAPER SENSOR
in the menu
•
Attach a holding-down device
when using uneven materials
(e.g. foil-wrapped magazines)
•
Adjust/teach-in paper sensor
•
Check paper sensor in
HARDWARE TEST
•
Check paper sensor cable
•
Check if the belt(s) is running
in the correct position
Fixed Head Printer with one
print unit:
•
If your material is pre-
printed on the reverse side
set the
PAPER SENSOR
to
Off
and
blank colourpaper.
Fixed Head Printer with more
than one print unit:
•
Clean the reflector of the
paper sensor
•
Check that the reflector is
aligned parallel to the paper
sensor
•
Check if the reflector is
damaged
Printer with separate feeder:
•
Check if paper gets stuck on
any machine parts
•
Check if the paper enters the
printer parallel aligned
Pos: 78.4 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/04_ERROR_PAPER_SENSOR @ 2\mod_1265617418639_912.doc @ 11281 @
Protocol
code
Display message
Cause
004
ERROR PAPER SENSOR CHECK
THE SENSOR!
CODE: 04
Unexpected paper sensor signal
Elimination
•
Clean the paper sensor
•
Clean the reflector
•
Adjust/teach-in paper sensor
•
Check paper sensor in
HARDWARE TEST
•
Call service
Pos: 78.5 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/05_Increase_The_Gap! @ 2\mod_1265617469330_912.doc @ 11284 @
