User Manual Version 3.1
35
5.8
How to perform a test print
The test print function allows a fast test of the printer settings. The test print can be used to
get a quick impression of the print quality of the inserted ink cartridges as well. There is no
need to have a connection to a PC to use this function.
You can use the following key combination (offline mode):
Quick + Arrow up = TEST PRINT (multiple pages, to abort press the Cancel
key)
Test print troubleshooting:
•
The test printout shows little gaps or thin white lines.
Æ
Some print nozzles may be clogged. Please use the CLEAN HEADS (
Quick +
Arrow down) function to purge the nozzles. You may also clean the nozzles using a
cleaning cloth. Please see chapter 8.1.1 How to clean an ink cartridge, on page 89
for further information.
•
The position of the test print is misplaced.
Æ
Please check if a paper size measurement has been done.
Æ
Check the position of the print unit.
Pos: 57 /Bedienungsanleitungen/Geräte spezifisch/Drucker/AS-830/5.9_Testprint Scan_AS-830 @ 2\mod_1268645912957_912.doc @ 13422 @
Figure 19: Testprint
Pos: 58 /Bedienungsanleitungen/Geräte spezifisch/Drucker/6.0_Ü1_Printer Menu (firmware V4.8) @ 3\mod_1298994979036_912.doc @ 30615 @ 1
