User Manual Version 3.1
107
Protocol
code
Display message
Cause
032
MACRO LOADING ERROR RAM
MEMORY IS FULL!
CODE: 32
Insufficient memory for the
macro
Elimination
•
Reduce the size of the macro
Pos: 78.29 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/33_MACRO_TOO_HIGH_Reduce_to_#_Inches @ 2\mod_1265619098268_912.doc @ 11359 @
Protocol
code
Display message
Cause
033
MACRO TOO HIGH REDUCE TO x
INCHES
CODE: 33
A macro sent from the PC does
not fit into the print area
Elimination
•
Reduce the height of the
macro to # inches
Pos: 78.30 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/34_FONT_ERROR _!!_LOAD_FLASH_FONTS! @ 2\mod_1265619140985_912.doc @ 11362 @
Protocol
code
Display message
Cause
034
FONT ERROR LOAD FLASH
FONTS!
CODE: 34
Error in the flash prom
Elimination
•
Call service
Pos: 78.31 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/35a_PAP._WIDTH_TOO_SMALL @ 2\mod_1265619233592_912.doc @ 11371 @
Protocol
code
Display message
Cause
035
PAP. WIDTH TOO SMALL MIN.
VALUE:
CODE: 35
Wrong paper width during paper
size measurement or at job
start from PC
Elimination
•
Check if the paper size is
within the printer
specifications
•
Check if the correct paper size
is sent from the PC.
•
Check if the paper sensor
triggers before the rear edge
of the paper
Pos: 78.32 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/47_ERROR_SMC1_RESET_THE_PRINTER @ 2\mod_1265619864479_912.doc @ 11401 @
