28
User Manual Version 3.1
Figure 9: Unused separation fingers
2. Adjust the
paper side
guides
•
Move the two paper side guides apart.
•
Put in one medium in the desired position.
•
Position the paper feed ramp in the middle of the two side guides.
•
Push the side guides back towards the medium.
•
The side guides should be close to the medium so that it cannot
run askew when it is pulled into the printer. The side guides should
not clamp the medium.
•
When using very narrow media, you can turn one paper side guide
by 180° (see Figure 10).
Figure 10: Turned side guide for a narrow medium
Larger materials
The optional available paper side guides for larger
materials make the feeding of these materials more
comfortable. Please see chapter 9.2 cessoires, on
page 126 for further information.
fixing screws
lift those
separation
fingers as well!
