manualshive.com logo in svg

Hasler HJ830, Operating Manual

Share
Download
Hasler HJ830 Operating Manual Download Page 147

User Manual Version 3.1  

147 

 

11.7

 

Additional display texts 

Under certain circumstances, additional information texts may be shown in the main 
display. In the table below you find descriptions for the different information texts. 

Information in main display 

Description 

Test 

The printer is running test prints. 

WaitEOT 

A pause command was sent to the printer. It will only 
continue with the print job, when the Ok 

 

key is 

pressed.  

NoData! 

The data for a page was not sent completely to the 
printer. 

PapRUN 

The printer is running a paper run test. 

NoPaper 

Data but no paper. E.g. the feeder is empty. 

EmerMode 

The printer is in emergency mode, because the 
internal model identification is damaged. In this 
unlikely event the printer will only work with a 
reduced performance to prevent the printer from any 
damage. Please contact your Hasler branch or 
dealer. 

 

 

Pos: 106 /Bedienungsanleitungen/Geräte spezifisch/Drucker/11.x_Ü2_Ink package ID number @ 2\mod_1269249230092_912.doc @ 13727 @ 2 

 

11.8

 

Ink package ID number 

The id number of the loaded ink package clearly indicates the settings and ink parameters 
currently used in your printer. With this ink package id number changes and updates can 
easily be tracked. 

Pos: 107 /Bedienungsanleitungen/Geräte spezifisch/Drucker/11.x_Ü3_Ink package ID number 6030206 @ 3\mod_1298296700989_912.doc @ 30527 @ 3 

 

Summary of Contents for HJ830































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands