manualshive.com logo in svg

Harris Maxiva ULX, Technical Manual

Introducing the Harris Maxiva ULX, a cutting-edge broadcasting solution designed for ultimate performance and reliability. Dive into the intricate details of this fantastic product with our comprehensive Technical Manual, available for free download from manualshive.com. Experience the pinnacle of broadcasting excellence today.

Share
Download
background image

Table of Contents (Continued)

2

Graphical User Interface (GUI) . . . . . . . . . . . . . . . 3-4

Global Status and Navigation . . . . . . . . . . . . . . . 3-4

GUI Home Screen . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Drive Chain Main Menu  . . . . . . . . . . . . . . . . . . . . 3-9

Drive Chain Faults  . . . . . . . . . . . . . . . . . . . . . . 3-10
Drive Chain Meters . . . . . . . . . . . . . . . . . . . . . .  3-11

Power Amp Main Menu  . . . . . . . . . . . . . . . . . . . 3-13

PA Faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14

Output Main Screen . . . . . . . . . . . . . . . . . . . . . . . 3-15

Output Faults . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16

Power Supply Main Menu . . . . . . . . . . . . . . . . . . 3-17

PS Faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18

System Main Menu . . . . . . . . . . . . . . . . . . . . . . . 3-19

System Faults  . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20
System Fault Log  . . . . . . . . . . . . . . . . . . . . . . . 3-20
System Service  . . . . . . . . . . . . . . . . . . . . . . . . . 3-22

Admin Setup (Local GUI Only) . . . . . . . . . . . 3-23
System Setup  . . . . . . . . . . . . . . . . . . . . . . . . . 3-25
Cabinet Setup . . . . . . . . . . . . . . . . . . . . . . . . . 3-27
System and Cabinet Power Calibrate . . . . . . . 3-27
System Version Screen . . . . . . . . . . . . . . . . . . 3-28
System Network Screen . . . . . . . . . . . . . . . . . 3-28

GUI Menu Structures. . . . . . . . . . . . . . . . . . . . . . 3-29

Section 4

Theory of Operation

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Active Logic Symbols. . . . . . . . . . . . . . . . . . . . . 4-1

Block Diagram Descriptions . . . . . . . . . . . . . . . . . 4-2
AC Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Transmitter Control System . . . . . . . . . . . . . . . . . . 4-4

Graphical User Interface (GUI)  . . . . . . . . . . . . . 4-4
Transmitter RF Power Control  . . . . . . . . . . . . . . 4-5
TCU Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

MCM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
PCM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
RF Detector/Pump Control/Interlocks Card . . 4-10
PA Interface Card . . . . . . . . . . . . . . . . . . . . . . 4-13

Predriver and IPA Drive A and B Busses  . . 4-13
PA BP (Backplane) Busses 1 Through 4.  . . 4-14

Customer I/O Card . . . . . . . . . . . . . . . . . . . . . 4-15
Exciter Switcher Card. . . . . . . . . . . . . . . . . . . 4-16
PS Monitor Card. . . . . . . . . . . . . . . . . . . . . . . 4-18

CPLD (Complex Programmable Logic 

Device) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-22
Life Support Functions . . . . . . . . . . . . . . . . . . .  4-22
Controller Area Network (CAN) Bus . . . . . . . .  4-24
System Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-25
Cabinet Bus. . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-26
Parallel Control Lines . . . . . . . . . . . . . . . . . . . .  4-27

Customer I/O Board  . . . . . . . . . . . . . . . . . . . . . .  4-28
Transmitter RF System  . . . . . . . . . . . . . . . . . . . .  4-29

Apex M2X Exciter(s) . . . . . . . . . . . . . . . . . . . .  4-29
 Predriver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-29
IPA (driver) and PA Module . . . . . . . . . . . . . . .  4-33

AC Distribution Board . . . . . . . . . . . . . . . . . .  4-35
AC/DC Converter Interface Board. . . . . . . . .  4-35
PA PS (AC/DC) Voltage Select Path . . . . . . .  4-36
PA Monitor Board  . . . . . . . . . . . . . . . . . . . . .  4-38
J1 - PA or IPA Connector I/O Board  . . . . . . .  4-39
Signal Distribution Board. . . . . . . . . . . . . . . .  4-41
 PA Module Phase Alignment  . . . . . . . . . . . .  4-41
PA Module Splitter . . . . . . . . . . . . . . . . . . . . .  4-41
PA Module Pallet Combiner. . . . . . . . . . . . . .  4-41
RF Pallets . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-42

FET Bias  . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-43

Module Combiner . . . . . . . . . . . . . . . . . . . . . . .  4-43

Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . .  4-44

Heat Exchanger/Pump Module Diagrams  . . . .  4-44
Leak Detector and Cabinet Drains . . . . . . . . . .  4-48

Maxiva 16 Module Transmitter Diagrams  . . . . .  4-49

RF Block Diagram  . . . . . . . . . . . . . . . . . . . . . .  4-49

Section 5

Maintenance and Alignments

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-1
PA Module Removal and Replacement. . . . . . . . .  5-1

PA Slot Locations . . . . . . . . . . . . . . . . . . . . . . . .  5-2
PA Module Removal. . . . . . . . . . . . . . . . . . . . . .  5-3
PA Module Installation . . . . . . . . . . . . . . . . . . . .  5-4
Operation With Inoperative PA Modules . . . . . .  5-6
PA Module/Rack Alignment. . . . . . . . . . . . . . . .  5-6

PA Module Bias. . . . . . . . . . . . . . . . . . . . . . . . . . .  5-9
PA Module Phasing . . . . . . . . . . . . . . . . . . . . . . . .  5-9
PA Module Component ID  . . . . . . . . . . . . . . . . . .  5-9
PA and IPA (driver) Pallet Replacement . . . . . . .  5-11
PA Module AC/DC Converter (PS) Board . . . . .  5-13

PS Board Removal and Replacement . . . . . . . .  5-13

Summary of Contents for Maxiva ULX





















































































































































































































































































































Reviews:

No comments

Related manuals for Maxiva ULX

Camille Bauer SINEAX V604s Operating Instructions Manual preview
SINEAX V604s
Brand: Camille Bauer Pages: 19
Labom PASCAL CV4 Operating Instruction preview
PASCAL CV4
Brand: Labom Pages: 6
Labom CI4 Series Manual preview
CI4 Series
Brand: Labom Pages: 28
Vaisala AQT530 Configuration Manual preview
AQT530
Brand: Vaisala Pages: 64
Jung HS2 RF Operating Instructions preview
HS2 RF
Brand: Jung Pages: 5
R.V.R. Electronica PTRLNV/4 User Manual preview
PTRLNV/4
Brand: R.V.R. Electronica Pages: 40
S+S Regeltechnik 1301-1214-0010-200 Operating Instructions, Mounting & Installation preview
1301-1214-0010-200
Brand: S+S Regeltechnik Pages: 32
Vector SDC-T1 Operation Manual preview
SDC-T1
Brand: Vector Pages: 3
V2 PROTEO1 Manual preview
PROTEO1
Brand: V2 Pages: 20
M-system 18PA Instruction Manual preview
18PA
Brand: M-system Pages: 3
Magnetek Enrange XLTX User Manual preview
Enrange XLTX
Brand: Magnetek Pages: 24
JUMO dTRANS T08 01 Operating Manual preview
dTRANS T08 01
Brand: JUMO Pages: 19
turck IM34-14Ex-CDRi Manual preview
IM34-14Ex-CDRi
Brand: turck Pages: 8
King Pigeon IoT Series User Manual preview
IoT Series
Brand: King Pigeon Pages: 37
M-system SENTRONIC M2SES Quick Start Manual preview
SENTRONIC M2SES
Brand: M-system Pages: 5
M-system Mini-M M2SP Instruction Manual preview
Mini-M M2SP
Brand: M-system Pages: 3
M-system Mini-M Series Manual preview
Mini-M Series
Brand: M-system Pages: 5
Kenwood VFO-240 Instruction Manual preview
VFO-240
Brand: Kenwood Pages: 8

Brands by name

Popular brands

Load more brands