7/26/05
888-2523-001
3-3
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
ATLAS Analogue
NOTE:
To differentiate these buttons from the ones which show up on the LCD display,
these will be referred to as "Quick" buttons in the manual text.
3.3
Graphical User Interface (GUI)
The GUI ("Gooey") was designed to provide an intuitive interface into the transmitter
control system. Once you know what information is available, finding the information
you want is simply a matter of following the screens to the desired section of the
transmitter. Menu Trees of all available screens are given at the end of this section, see
"3.10 GUI Menu Structures" on page 3-36.
For the most part, all navigation through the GUI screens is done via the touchscreen
and softkeys (software buttons). The exceptions are the 5 hardware buttons mentioned
above. The touchscreen display is also divided into an active display area, which will
change with each screen, and the global areas which are present on all screens.
3.3.1
Global Status and Navigation
The top 2 sections of the touchscreen display are considered global because they show
up on all screens. The top line indicates the transmitter name and model number.
Figure 3-2 Global Display Header
The second line of the display has operational and status information including:
Vision Power (Peak) Bargraph
Transmitter Model Number
Operation and Fault
Status
Vision & Sound
Power Outputs
Sound Power Bargraph
Main Menu Symbols
with Color Status
100% Mark - Based on
Nominal Power Output setting
in System Setup screen
Summary of Contents for ATLAS ANALOGUE
