Four post lift
Happ25 4 post hoist
Version 7.0
©HAPP Australia Pty Ltd
Page 9
To use this hoist in a workplace contact HAPP for the WH&S registration kit, you will need your serial
number of the hoist. Only hoist owners that have the official HAPP company signed and sealed
approval are considered WH&S approved by HAPP.
Warranty
HAPP Australia Pty Ltd warrant products against faulty workmanship or defective materials for one
year after date of purchase. Warranties are on a parts only basis and do not include labour.
Problems due to Improper installation, storage, lack of maintenance, lack of lubrication, incorrect
operation, fair wear and tear are not covered in your warranty.
To claim warranty: Email pictures of item and text description to [email protected] with claim
details, we will advise if parts need to be sent to us. In order to advise production of a fault or defect we
must supply pictures and text. You must send pictures and details to us to receive warranty
components.
Parts are sent to HAPP for verification of fault and subsequent exchange, replacement parts will be
sent after verification.
1.6 Operating instructions
Operation
•
Lift operation by authorized personnel over 18 years only.
•
Apply the parking brake after positioning the vehicle on the lift.
•
Do not allow anyone to stay in lift area during raising and lowering cycles.
•
Closely watch the vehicle and the lift during raising and lowering cycles.
•
Observe the rated load capacity and load distribution.
•
Do not allow anyone to climb on lift or stay inside vehicle
•
After raising the vehicle briefly, stop and check adapters for secure contact.
•
Once the disk adapters contact the lift points, operators should check arm
restraints for engagement.
•
Make sure the vehicle doors are closed during raising and lowering cycles
Hoist Operating Procedures
This product is designed to raise vehicles only for the purpose of examination, repairs and
maintenance.
