Four post parking lift Happ25 4 post hoist
29
Limit switch wiring
If you elect to install a limit switch;; the limit switch does not come with a connector
but the pump has one, we have supplied a connector to allow you to create a
quick connector for the pump assembly if required. Alternatively you can remove
the connector and directly connect the limit switch wires to the pump.
Connector provided.
This connector can also be used to disable the limit switch.
Important: The limit switch connector should be connected and either shielded with extra insulation
(double insulated) or moved back inside the control box. If the limit switch is operational a 4Amp
fusible link must be installed. Inline fuse holders are available from HAPP if required.
Electrical wiring – AS3000
Power wiring will be according to the following Australian standard (AS3000),
Electricians must remove the top cover and verify ground , neutral and phase
connections as well as limit switch connection if required and connect wires
according to the following specification.
Phases
Neutral
Earth
Australia, New Zealand (AS/NZS
3000:2007 3.8.3)
,
,
Connect to:
3/L2
5/L3
Motor
Chassis
