Four post lift
Happ25 4 post hoist
Version 7.0
©HAPP Australia Pty Ltd
Page 11
Operation
Ensure all vehicles are loaded with lift fully down. Carefully align pads with correct mounting locations on
vehicle.
Continually check for balance and rigidity of vehicle on hoist before lifting to operating height.
Raise:
•
Ensure all personnel are clear of hoist
•
Push green button to raise
•
Push hydraulic release lever to lower
until safety latches engage
before commencing work
Lower:
•
Ensure all personnel are clear of hoist
•
Push green button to raise slightly
•
Disengage safety latches on each column per operators manual
•
Push hydraulic release lever to lower
Before working at any position ensure the raise procedure is followed and safety latches are engaged on
all columns.
Maintenance
Follow the HAPP user guides for regular planned maintenance. Ensure checks by competent persons are
performed at regular intervals or in the event of any accidental damage.
Isolate electrical circuits before performing maintenance procedures.
Hydraulic oil:
ISO grade 46 grade hydraulic oil is recommended for this hoist.
Environment:
This hoist is not designed to be operated for outside, steam cleaning or high moisture or harsh
environments. Vehicle hoists installed in such environments are not covered by HAPP warranty.
Only HAPP hoists that are registered with HAPP and Workplace Health and Safety are to be used in
business premises. In these locations the HAPP registration label will be affixed to the hoist and
supporting documentation is to be held on the business premises.
This document does not relieve the owner / operator of its legal responsibilities in accordance with the
Workplace Health and Safety Act 2011.
