Hanwha Techwin Wisenet XRN-6410DB4 User Manual Download Page 93

Page: 93 / 118

English

_93

booKMArK SeArcH

You can search for bookmarked data.

Select < > in the <

> menu.

Select a channel to search.

Select the date and time to search.

Click the <

> button.

The bookmark search results will be displayed. Click the desired bookmark list to play.

Bookmarked images will be stored without being overwritten during repeated recording. However, when the automatic deletion is set, it

will be deleted according to the set period.

When the bookmark is released, the video will not be saved. If necessary, before releasing the bookmark, export the video.

Up to 100 bookmarks can be specified.

SeArcH reSultS exPort

Search results of events, texts and bookmarks can be exported to a file.

example) bookmark search result export

Click < > in the search results list.

Select the desired list and click <

The exported video is saved as .avi file in the download folder.

●

Arc

H viewer

Summary of Contents for Wisenet XRN-6410DB4























































































































Search results

Summary of Contents for Wisenet XRN-6410DB4

Reviews:

Related manuals for Wisenet XRN-6410DB4

Brands by name

Popular brands

Hanwha Techwin Wisenet XRN-6410DB4, User Manual

Search results

Summary of Contents for Wisenet XRN-6410DB4

Reviews:

Related manuals for Wisenet XRN-6410DB4

Brands by name

Popular brands