Hanwha Techwin Wisenet XRN-6410DB4 User Manual Download Page 105

Page: 105 / 118

English

_105

rAid

You can set the RAID (Redundant Array of Independent Disks) mode.

distributed recording

By allocating a certain portion of HDDs to each group, you can distribute the amount of recording for optimal

saving.

S.M.A.r.t

You can check the connection status and details of the hard disk mounted in the recorder.

Monitor

You can set the information displayed on the monitor as well as the output system.

Setup > device > Monitor

If the screen does not work properly, see “

Troubleshooting (FAQ)

” in the Appendix.

The Monitor Setup settings control the monitor connected to the Recorder.

Video exceeding the resolution of 1080p will not be displayed from the secondary monitor.

●

Setu
P viewer

Summary of Contents for Wisenet XRN-6410DB4























































































































Search results

Summary of Contents for Wisenet XRN-6410DB4

Reviews:

Related manuals for Wisenet XRN-6410DB4

Brands by name

Popular brands

Hanwha Techwin Wisenet XRN-6410DB4, User Manual

Search results

Summary of Contents for Wisenet XRN-6410DB4

Reviews:

Related manuals for Wisenet XRN-6410DB4

Brands by name

Popular brands