manualshive.com logo in svg

Hanwha Techwin Wisenet XRN-6410DB4, User Manual

Share
Download
Hanwha Techwin Wisenet XRN-6410DB4 User Manual Download Page 34

34_

 search 

search 

exPort SeArcH

You can search the exported data on the connected storage media. Only data saved in recorder file format when 

exported will be retrieved.

1. 

Select <

export search

> in the <

Search

>.

2. 

When you click on the storage device selection, the device search window is displayed. Click < 

 > to search 

Storage Media. 

3. 

Click <

Search

>.  

Exported file information will be displayed. 
•  Folder : Displays the folder where files are stored.
•  Name : Displays the saved file name. 
•  CH : Displays the channel of the recorded video.
•  Time : Displays the start time and end time of the exported video. 
•  Play : Plays the exported video with an instant viewer.

4. 

If you double-click an item to play in the search list, the recorded video will be played.

Arb SeArcH

You can search auto-recovery backup data stored on ARB storage devices.

1. 

Select <

Arb search

> in the <

Search

> menu.

 

`

For more information about ARB search, refer to the "

Setup 

>

 Setting the device 

>

 Storage device

" page in the Table of 

Contents.

2. 

When you click on the storage device selection, the device search window is displayed. Click < 

 > to search for 

backup devices. 

The model name of the ARB storage device will be displayed.

3. 

Click <

Search

>. 

The ARB file information stored on the device will be displayed. 
•  Folder : Displays the folder where ARB data is stored.
•  Name : Displays the file name stored on the ARB device.
•  CH : Displays the recorded channel.
•  Time : Displays the start time and end time of the backed up video recording. 
•  Play : Plays the recorded video with an instant viewer.

4. 

If you double-click an item to play in the search list, the recorded video will be played.

Summary of Contents for Wisenet XRN-6410DB4























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands