96
For example, if SETUP and
keys are pressed together
the LCD will look like this:
Note
A maximum of two keys may be pressed simultaneously to
be properly recognized .
•To exit the keyboard test procedure press LCD, CAL and
SETUP simultaneously; the instrument will remain in the
setup menu and move to the next item (t .02) .
EEPROM SELFTEST
The EEPROM selftest procedure involves verifying the stored
EEPROM checksum .
•To enter the EEPROM test procedure select the setup
item t .02 and an “OFF” blinking message will appear
on the LCD .
•Press the
(or
) key once and the message will switch
to a blinking “GO” .
•Press CFM key to confirm or the
(or
) key again to
return to the previous status .
•If confirmation is given when the “OFF” message is blink-
ing, no action is performed and it will move to the next
setup item (t .03) .
•After confirmation, the selftest procedure begins with the
“tESt” message blinking for a few seconds .
