25
Otherwise, if a numeric value has to be entered for the
item, use the
or
key to change the value of the
blinking digit and the
key to cycle through the num-
ber’s digits .
• Once a value is set, press the CFM key to confirm . The
instrument will turn to the next item and the new item’s
value will be displayed on the primary LCD .
• If a wrong value is confirmed, the
WRONG indicator starts blinking,
the new value is not accepted and
the instrument will not switch to the
next item until a correct value will
be confirmed .
• Instead of selecting the item manually, it is possible to
cycle through all the items of a selected group by pressing
repeatedly CFM key . The procedure to modify the item’s
value is the same described above .
If the last item of the group is reached, by pressing the
CFM key again the primary display will show the group
name and it will be possible to change the group by
pressing the
or
key .
Note
At any time for exiting the setup mode press the SETUP
key . If no modification has been confirmed, no setup item
is changed .
