95
KEYBOARD TEST
• To enter the keyboard test procedure select setup item
t .01 . A blinking “OFF” message will appear on the pri-
mary LCD .
• Press the
(or
) key once and the message will switch
to a blinking “GO” .
• Press CFM to confirm or the
(or
) key again to return
to the previous state .
• If confirmation is given when the “OFF” message is blink-
ing, no action is performed and it will move to the next
setup item (t .02) .
• Once confirmed, the keyboard selftest procedure begins
with the scrolling message “Button test - Press LCD and
CAL and SETUP together to escape” .
• The LCD will then show only a colon .
• As soon as one more key is pressed, the appropriate
segment out of 88:88 corresponding to the pressed key
will light up on the screen .
