40
(29)
: Every SMS sent by the instrument requires a reception
confirmation from the user (phone call to the instrument) .
If this confirmation does not arrive (for example because
the message was lost or did not reach the Short Message
Service Center), it is possible to set the instrument in order
to send again the message . The maximum number of re-
peated messages is set through this item (see P .06 for the
delay between two subsequent messages) . If this item is
set to 0, then no confirmation is waited by the instrument .
(30)
: This item sets the delay between the sending of two
subsequent messages . It has effect only if item P .05 value
is 1 or greater .
(31)
: The SIM’s expiration date has to be inserted manually
through these items (P .07 - P .09) . The user is supposed to
update these items every time a recharge of the card occurs .
Three advising messages are sent to the telephone number
configured in item P .02 (and P .03) when the card is going
to expire (two weeks before, one week before and the day
before) .
If the user sets the item P .04 to “222” then no check will be
made on the SIM expiration date .
(32)
: A “temperature level” error is generated whenever
the measured temperature is greater than the “maximum
temperature level” or lower than the “minimum temperature
level” . The difference between maximum and minimum must
be at least 2 °C . A small fixed hysteresis (0 .3 °C) must be
passed to have the alarm turned off .
(33)
: The modem present in the
HI504902
module is
certified by Telecom to work in the following countries: Ar-
gentina, Australia, Austria, Belgium, Brazil, Canada, Chile,
China, Cyprus, Czech Republic, Denmark, Finland, France,
Germany, Greece, Hong Kong, Hungary, Iceland, India, In-
donesia, Ireland, Israel, Italy, Japan, Korea, Liechtenstein,
Luxembourg, Malaysia, Mexico, Netherlands, New Zeland,
Norway, Philippines, Poland, Portugal, Russia, Singapore,
Slovak Republic, South Africa, Spain, Sweden, Switzerland,
Taiwan, Turkey, United Kingdom, United States .
If your country is not present in the list, please contact your
local Hanna Instruments Office .
If the country code is shorter than 3 characters, fill the code
with zeros in front .
