HandTop HT3200-UV K Series, Installation Instruction

Page: 72 / 113

71
6.5.3 Left/right direction offset
Select “Left direction offset” in the drop-down menu and print.
Observe the calibration print through a magnifying glass
Write down the corresponding parameters that have been aligned.
Modify the parameter of left direction offset according to step 2.
Repeat step 1 / 2 / 3 till left direction offset is ok.
6.5.4 Bidirectional offset
Left/right direction offset indicates the calibration parameters of the
nozzle jetting from left to right and from right to left.
How to observe the testing picture of left/right direction offset?
The blue lines at left-2 is best aligned
with the black base line. So minus 2
from the original value.
The original value of Cl is 3, After modified the value of Cl is 1,3-2=1
Overlapped left/right direction offset