HandTop HT3200-UV K Series, Installation Instruction

Page: 47 / 113

46
Calibration printing list
Circular printing mode including auto and manual options, do
not select it while copy printing is selected.
Copy printing function, can’t be selected together with circular
printing at the same time.
5.2.2 Test and calibration interface
Function interface Introduction
1. Tighten
：
Click tighten function, the driving roller will
move while the slave roller stop. This will make the
media between these 2 rollers flat and smooth. Do not
click it more than 1 time in case the driving roller
overload.
2. X/Y Stepping. After setting, XY stepping distance will
become the set value. Other functions are the same as
the main page.