HandTop HT3200-UV K Series, Installation Instruction

Page: 48 / 113

47
Print head spray function. The print head will
frequently spray inks after click.
The version info for the software. Other functions
are the same as the main page.
1. Print head status test: Print test strip and observe print
head status
2. Print head vertical calibration: Physical adjustment for
print head left and right offset
3. Nozzle alignment: Physical adjustment for print head
front and rare position
4. Left offset: Print head left offset adjustment
5. Right offset: Print head right offset adjustment
6. Bi-direction offset: Print head bi-direction offset
adjustment
7. Stepping calibration: Adjust the stepping value for every
pass
8. Point of origin printing: Adjusting base point
9. Voltage and temperature adjustment: color aberration
adjustment for same color channel.
Options for different carriage speed, please refer to the
according settings of bi-direction offset and stepping
calibrations.
1. L_Calibration
：
Left offset adjusting value
2. R_Calibration
：
Right offset adjusting value
1. Speed Ratio
：
carriage speed
2. Bidi Offset
：
Offset adjusting value for different carriage
speed
1. Calibrate stepping for different pass. When this
calibration finished, the common adjusting value will not
be applicable, the separated settings will be precede
over it. The stepping value for different pass will follow
neighboring principle, 6PASS
（
1-6PASS
）、
8PASS
（
8-10PASS
）、
12PASS
（
12-16PASS
）
2. Stepping calibration: use the common stepping value to